The following instructions may be used to set up a computer to run a KinExA® 4000. Use the appropriate instruction set for your operating system: Windows 11 or 10.

Windows 11 — Setup Network Connections

1. In the Windows search bar, type View Network and select the View Network status and tasks Control Panel application.
2. Select Change adapter settings, and double-click the network connection associated with the instrument. Select Properties.
3. Under “this connection uses the following items…”, double-click Internet Protocol Version 4 (TCP/IPv4). Select Use the following IP Address.
4. Set IP address to: 192.168.79.100
5. Set Subnet mask to: 255.255.255.0
6. Leave default gateway and DNS servers blank. Click OK. Close all open network settings windows when complete.

Note: If it is necessary to connect to an external network, a second ethernet connection is required.

Windows 11 — Proxy Server Settings

When setting up your Proxy Server, enter this IP address as an exception: 192.168.79.*

Windows 10 — Setup Network Connections

1. In the Windows search bar, type View Network and select the View Network status and tasks Control Panel application.
2. Select Change adapter settings, and double-click the network connection associated with the instrument. Select Properties.
3. Under “this connection uses the following items…”, double-click Internet Protocol Version 4 (TCP/IPv4). Select Use the following IP Address.
4. Set IP address to: 192.168.79.100
5. Set Subnet mask to: 255.255.255.0
6. Leave default gateway and DNS servers blank. Click OK. Close all open network settings windows when complete.

Note: If it is necessary to connect to an external network, a second ethernet connection is required.

Windows 10 — Proxy Server Settings

When setting up your Proxy Server, enter this IP address as an exception: 192.168.79.*

Note: Support for Windows 10 will end on October 14, 2025.